The heavy hammer crusher with one-break forming is favored by mining companies. Customers all have good feedback: the process is simple and easier to maintain than the jaw crusher and impact crusher. The feed particle size is large, the output is large, the particle shape is good, and the startup time is long. It is very useful for crushing limestone, bluestone, and construction waste.

 

The heavy hammer crusher can crush stones and form them in one time without the need for a secondary crushing and shaping process. It can reduce costs by about 40%, with low energy consumption and low investment. It is widely used in many industries such as mining, smelting, building materials, roads, railways, water conservancy and chemical industries. It is particularly suitable for crushing limestone and medium-hard stones with a compressive strength of less than 200MPa.

 

 

 

 

 

The hammer crusher crushes stones and forms them in one time without the need for a secondary crushing and shaping process. It can reduce costs by about 40%, with low energy consumption and low investment.

 

 

The hammer crusher is particularly suitable for crushing limestone and medium-hard stones with a compressive strength of less than 200Mpa.

 

 

The cone crusher uses an external lubrication system including oil pump, oil tank and pipeline. When the oil temperature is too high or the oil flow rate is too slow, the crusher will be automatically shut down.

 

 

Modular design, by changing the cavity type, you can achieve the conversion of coarse, medium and fine crushing, and improve production efficiency.

 

Our heavy hammer crusher is highly praised in the market, with simple process, good maintenance, large feed particle size, large output, good particle shape and long start-up time. Under the general trend of green mining, the requirements for equipment in mining reform are getting higher and higher, and the one-break forming heavy hammer crusher has become the only choice for crushing equipment.