1. The upper half of the Briquette Extruder Machine is the pressure sheet structure. Its composition is mainly upper, medium -sized, and down, and the three tables are connected into one. The surrounding 33 paid mode is evenly arranged on the edge of the turntable. The tail of the upper and lower rods is embedded in a fixed curve rail guide. When the turntable is rotating, the upper and lower rushing is to achieve the purpose of the film as the curve rail guide is lifted.

 

2. The main working process is divided into: (1) filling; (2) pressing; (3) the film; the three programs are continuously carried out, the filling and pressurization are regulatory control mechanisms, with table cards, simple operations.

 

3. The distribution of the structure is dual -voltage type, and there are two sets of symmetrical pressure wheels in the left and right. Therefore, every week can be released.
 

 

4. There are 33 molded holes in the turntable. The advantages of each single are arranged. The advantages of the left and right pressure wheels are pressured at a non -at the same time, so that the vibration and power consumption of the machine greatly reduces it.

 

5. In the electric motor loader, use a triangular belt to drag the worm to rotate the turntable, and install the stepless transmission belt wheel on the motor shaft. The movement of the motor skateboard can be adjusted arbitrarily. Use reliable noise.

 

6. The side of the machine seat is equipped with a powder suction box, including a blossom, powder storage room, and filter room. When the machine is running at high speed, it produces flying powder and medium models. Plug in stuffing, keeping smoothly and normal.
If you want to know about more briquette machine, please click here.