1. Before use of the Briquette Extruder Machine, check the quality of the punching mold. Whether there is a lack of edges, cracks, deformation and tight loosening requirements and whether the device is complete and well work.

 

2. Check whether the powder of the granules is dry and the powder in the particles does not exceed 10%. If it is not qualified, do not use it hard, otherwise it will affect the normal operation of the machine and the losses of the raw material.

 

3. The first test of the test should be placed on the "0" position, pour the powder into the bucket, rotate the test hand wheel with the hand, and adjust the filling and pressure at the same time. The degree meets the requirements of the finished product, then starts the motor first, and then opens the clutch to formally operate production. During the production process, the quality of the tablet must be drawn from time to time. Whether it meets the requirements, and adjust it if necessary.
 

 

4. The choice of speed has a direct impact on the life of the machine. Because the nature of the raw materials and the size and pressure of the diameter and pressure of the raw materials cannot be used in uniformly. , Slowly use the Yangtze River Delta to drive the outer wheel, suitable for suppressing minerals, plant grass, and such as fast and difficult to mold. Quickly use the short triangle to drive the inner rope. Materials, so the user depends on the actual situation.

 

  5. Managers are familiar with the technical performance, internal structure, the principles of the use of the control mechanism, and the place where the control mechanism is not allowed to leave the work place during operation to prevent the machine from damaging the machine and ensure production as the premise.

 

6. Pay attention to whether the sound of the machine is normal at all times. When you encounter a sharp sound, park and stop it.
If you want to know about more briquette machine, please click here.