We all know that the pusher in the Biomass Briquette Machine is relatively easy to wear, and the requirements for repairing are relatively high. Only by fully mastering the maintenance technology can we improve production. In order to increase the use time of the pusher. Here are some of the relevant summary we make for everyone:

 

1. The welding process is not good. Most of the market on the market is welded with electric welding. It has only been seen for about 30 hours. Because welding cannot solve a high temperature resistance problem, and wear -resistant materials are difficult to evenly be uniform when welding. Soluble into the steel;

 

2. The quality of the welded material used is too poor that the time is too short. Because it is resistant to wear resistance and high temperature resistance, the chip welded on the market is generally five to ten hours. Materials such as welding can be used for about 100 hours;

 

3. Different compression ratios due to different materials. This is that many pushers do not know what problems are. The axis is positive and has not been worn. It will not work for a day, but it will not work for two days. The fineness and thickness of the materials have different requirements for the pusher. Generally speaking, the compression ratio of miscellaneous trees is small, and the compression ratio of fir wood is large. This is why many people say that the fir sawdust is worthless. There is a pusher with a variety of materials, and all kinds of materials should be generally separated.

 

Understand the above content of repairing the pusher, maybe you have understood that the welding material of repairing the pusher is important, and the other is technology. Only by mastering these can we make ideal products. If you want to know more about the Biomass Briquette Machine informations, please click here.