Analysis of the details of the carbon powder briquette making plant
Many people want to open a carbon powder briquette making plant, but do not know the details of the inside. If you want to get greater profits, you must start from details, from investment budget to raw materials and production costs, as well as market inspections, etc., you must have a detailed understanding and deployment. First of all, we must consider production raw materials, product sales, investment size and profit margin, and secondly, we must also consider the difficulty of equipment operation technology and the current industrial policy of the country.
1. Source of raw materials: Raw charcoal powder for production of charcoal. There are wide sources and many varieties. Generally speaking, rural rice shells, peanuts, fruit shells, cotton rods, soybeans, sesame rods, corn rods, corn stick cores; furniture factories, wooden factorys, bambooware factories, shavings, bamboo and wooden corners; Sanhe board factory, dust particles and corner materials of fine wooden board factory; sugar cane residue of the mustard factory; reed grass and small branches on the mountain can be used as raw materials for production of carbon powder. The formation charcoal plant should generally be built where there is sufficient raw material charcoal powder. Consider the cost of transportation of raw materials and minimize production costs.
2, the market for molding charcoal: Since the reform and opening up, the industrial and related industries have developed rapidly. The use of charcoal as the activated charcoal plant, the carbonized silicon plant, the siliconic coach, the steel plant, the carbonized carbonized plant, the carbonized carbonized plant, The explosive factory, mosquito coil factory, thermal insulation material factory and agriculture, feed industry, catering industry, people's living heating and other enterprises and related industries have increased, and the price has continued to rise, and there are still situations in some regions. In recent years, in order to protect the ecological balance, my country has successively promulgated the policy and decree of "prohibition and burning", and at the same time, it has strengthened its crackdown on logging and charcoal. In this way, the charcoal supply of the market is more tense. In addition, the General Administration of Customs of my country also prohibited the exit of rod -shaped charcoal exports with an outer diameter greater than 4 cm and a length greater than 10 cm in the context of 2003 and 2004, respectively. All of this paved the way for the production of molding charcoal and opened up the sales market of molded charcoal at home and abroad. In addition, compared with traditional wood (tree) charcoal compared with traditional wood (tree) charcoal, it has high carbon-containing volume, large heat capacity, small volatile, and long burning time-3-4 times that of ordinary log (tree) charcoal, and smokeless, tasteless, etc. Advantages, so it is well favored by users at home and abroad, and there are scenes of rumors (tree) charcoal, which are preferred to be expensive without the low price. Moreover, because the market log (tree) charcoal has gradually decreased, its price is lower than the forming charcoal, making the molding charcoal more popular in the market.
3. Investment budget: Open a small carbon powder deep processing plant with an annual output of 200 to 300 tons, and its full set of equipment has invested about 30,000 to 100,000 yuan. If you only buy some equipment, you can reduce some investment. The mobile funds are about 10,000 yuan, which is used to purchase raw materials or the wages of initial workers. The area of the plant is about 50-looom. In addition, the raw materials and the finished database should be considered. In the early days of running a factory, you can use old factories or leased others for idle houses, or you can also build simple factories. In short, according to your actual situation, we must do a good job in the budget of the early stage. Then, according to your existing financial resources, determine the wholly -owned, joint venture, and work.
4, profit analysis: The high and low profit are related to many factors such as production costs and management levels, the production and quality of molding charcoal, market price and taxes. Among them, the quality of the quality of forming charcoal and the impact of the high and low production costs on profits are obvious. Carbon: (Exit use of charcoal)
Its comprehensive cost is about 638 yuan / ton, the domestic price is 1600 to 2500 yuan / ton, and the net profit is about 962 yuan. The export price is between 350 and $ 500 (about 2800 ~ 5,000 yuan) per ton, and the net profit is not less than 2,000 yuan. It can be seen from the above data that if the annual output of 300 tons of charcoal is produced, the annual net profit can reach 300,000 yuan. Generally speaking, after the normal production of the formation charcoal factory, all investment can be recovered in less than half a year.
5 Other conditions: The use of waste charcoal powder production for molding is the environmental protection industry supported by the country. Therefore, enjoy the policy given by the State Administration of Taxation below. The Briquette Extruder Machine is simple, easy to learn, and the junior high school graduates who understand the machinery and electricians can master all the operation technologies after training, produce qualified products, and then practice all the faults in production. External technical staff. Conclusion: The carbon powder briquette making plant is a good project with low investment, fast results, large profit margins, sufficient raw materials, broad market prospects, and good projects for the country and the people. It is more suitable for various carbon powder production lines in urban and rural areas.
If you want to know about more briquette machine, please click here.
If you want to know about more briquette machine, please click here.