The Briquette Extruder Machine is designed according to the advantages of new foreign new formations. The equipment uses a hydraulic system to abandon the disadvantages of the old -fashioned spiral molding machine, serious machine wear, difficult technical grasp, expensive accessories, and low efficiency. The product has the following characteristics:

 

1. The equipment adopts a fully automatic electronic control system, which can achieve the operation and production of the machine by single person;

 

Second, the equipment is strong. Can adapt to bamboo charcoal powder, charcoal powder, straw charcoal powder, etc.

 

Third, the equipment output is large, the energy consumption is low, and the energy saving is more than 50%than the old -fashioned molding machine.

 

Fourth, equipment use, maintenance and convenience, convenient and convenient to replace the grinding head, can produce various specifications of water -smoke charcoal, silver bar charcoal, charcoal stick and other products.

 

Fifth, the equipment adhesive formula is easy to learn, and the company's free training guidance.

 

6. Auxiliary equipment such as wheel crusher only needs to stir the charcoal powder for one minute to produce.

 

Seven, the molding effect is good, no secondary products.

 

The Briquette Extruder Machine and the stick maker are two types of rod equipment in the charcoal machine, which are produced by carbon. So how are the carbon powder molding machine and stick maker?

 

Briquette Extruder Machine is the raw material for carbonization and then crushing, and then uses a molder to make carbon powder into finished carbon. The rod machine is to crush the raw materials and then dry it. Then the product stick is made.

 

The Briquette Extruder Machine and the stick maker, one is suppressed directly the finished product, the other is a semi -finished product, and carbonization needs to be carried out to become the finished product.

If you want to know about more briquette machine, please click here.