For customers who want to build a carbon powder deep processing plant, the first thing that needs to be understood is the price of Briquette Extruder Machine, and how to buy low -priced and good quality Briquette Extruder Machine to reduce equipment investment.

The old -fashioned Briquette Extruder Machine is the equipment that squeeze charcoal powder formed. The difference between the carbon powder molder and the stick maker is mainly raw materials. The raw material for the Briquette Extruder Machine formed by the carbon powder is carbon powder, and the sawdust cannot be suppressed. When the Briquette Extruder Machine is formed, the additive is needed, and it is not needed when the stick maker is a rod using a sawdust wood. This is a big difference. The yield of Briquette Extruder Machine is larger than the output of the rod machine. The power will be smaller.

The Briquette Extruder Machine is mainly used to squeeze coal powder into environmentally friendly carbon such as circular or square with a certain strength. The inner tube of the traditional Briquette Extruder Machine is parallel to the main axis, and it is not vertical with the spiral surface of the spiral impeller, resulting in a large axial coal transmission resistance, high use of useless power consumption, and high energy consumption of coal stick molding. Change the inner coal -seated inner grooves parallel to the main axis of the traditional carbon powder molding machine to the oblique groove that is not parallel to the main axis, so that the oblique groove is perpendicular to the spiral surface of the spiral impeller. , Reduced the use of unsecured power consumption and achieved the purpose of energy saving. The rotating impeller is clamped into the coal from the mouth and pushed forward the coal. The raw coal is gradually compressed, the particles are closely closer, and at the same time, it produces a relatively large stirring and mixing. At this time, between the granules of the raw coal, the particles and the leaves and the simplification produce strong friction and cutting. At the same time, under the influence of the heat, the temperature of the raw coal rises, the moisture and adhesives are more uniform, and the plasticity of the coal is greatly increased. After the controlling effect of the mold cone, the coal particles are compressed more closely, and then the straight part of the mold is pressed into the mold of the mold, and the carbon powder is formed.

The Briquette Extruder Machine uses a hard tooth surface reducer, with a small volume and high bearing capacity. The impeller inside the coal rod extract is designed with thickened blades. The impeller and the inner lining plate of the cylinder are made of wear-resistant essence material, which is 4-5 times higher than ordinary materials; Made of abrasion -resistant alloy steel is convenient for replacement. The head and the cylinder are piloted in the form of twisted. It can be opened during maintenance. It is convenient to replace the internal impeller and cylinder lining.

If you want to know about more briquette machine, please click here.